Software Instruction Manual

Toolkit utilities 64
WWID=11111111
HostAdapterBiosEnable=1
SelectBootEnable=1
BootDeviceWWID=22222222
BootDeviceLUN[0]=3
You must then invoke the tool to load the contents of hba.ini input to the HBA NVRAM: hpqlarep /l
hba.ini.
Using LO100CFG
LO100CFG enables you to configure the LightsOut 100 device that appears on the HP ProLiant 100
series servers.
Under Windows®, WMI is used through the Microsoft_IPMI class, make sure WMI is installed in the
Windows® PE environment.
LO100CFG command-line syntax
lo100cfg [ -h | -x | -v | -i "file.xml" | -o "file.xml" | -s ]
LO100CFG command-line arguments
Command-line argument Description
-x
This argument displays example XML to perform configuration.
-v
This argument outputs the current copyright and version information and
then exits.
-s
This argument captures the current status and outputs it to the console.
-h
The argument lists basic command line arguments and supported XML
tags.
-i "file.xml"
This argument loads and runs the given XML configuration file.
-o "file.xml"
This argument loads and runs the given XML configuration file.
LO100CFG return codes
Value Meaning
0
All operations succeeded.
1
Operation was successful, but a minor error was found in the input XML or system
settings.
2
XML failed validity tests.
3
Field in the XML file has invalid values. Valid fields still applied.
4
System is unsupported or is not running IPMI drivers.
5
One or more of the requested update failed. See the console output. The system might
be in an inconsistent state.