Operating Environment Software Instruction Manual

9. Set the attributes for the Virtual Storage. Note that the Storage Type must be Virtual.
Check Disk is bootable to denote that the disk is the boot disk for the server group.
• For bootable disks, you can assign a Storage Volume Name to match mounted volume
names on a VM Host. Storage Volume Name(s) is an optional feature for the boot disk.
Storage volume names are used for every virtual disk attached to the virtual server group.
Enter the VM Host storage volume names separated by commas. During provisioning,
IO allocates virtual storage from storage volumes with names that match the storage
volume names of the boot disk.
• For non-boot disks (Disk is bootable is not checked), the Storage Volume Name field is
not enabled. The Storage Volume Name is identical to that of the boot disk.
After you select the template, if the Virtual Storage size is insufficient, it will be increased to
at least the size of the template.
10. Set the attributes for the Network. You should only need to select an appropriate network;
there are no other attributes to specify. You can optionally include the cost values shown.
11. Click Customizable to allow certain attributes of the template to be changed, and click
Recoverable to mark the template for disaster recovery. See “Customizing template attributes
when a service is created” (page 117) and “Configuring a disaster recovery (DR) service”
(page 44) for more information.
12. After you have completed these steps, note that Validation Status is green. If it is not green,
click Show Issues and resolve those items.
Creating infrastructure orchestration templates 113