Operating Environment Software Instruction Manual

If using Ignite-UX, the client has not been set up with permission to run the erase disk job in Systems
Insight Manager.
If using Insight Control server deployment, follow Step 9 in the Creating server deployment job
folders procedure. The job must have only two steps:
DetailsTask
Action
Wipe DiskRun Script
Shutdown (if
available)
Power Control
NOTE: When using the mxnode command, enter the root/<root password> for the
provisioned server into the global credentials for Systems Insight Manager
(Options→Security→Credential→Global Credentials).
mxagentconfig –a –n <target IP or DNS name> –u <user> –p <password>
Where:
<user>
is root
<target IP or DNS name>
is the IP address of the newly created Systems Insight Manager node
<password>
is the root password of the newly created Systems Insight Manager node
Matrix infrastructure orchestration did not correctly erase the disk during deprovisioning
Matrix infrastructure orchestration did not correctly erase the disk during deprovisioning.Issue
The Insight Control server deployment erase disk job name is not correct.Possible cause
For infrastructure orchestration to correctly erase the disk content when deprovisioning physical
servers using a non-English server deployment version, there must be an English Erase ProLiant
Action
ML/DL/BL Array Configuration {LinuxPE} job under the Server Deployment
Toolbox\1 – Hardware Configuration\Array\ server deployment folder. Copy and paste
the equivalent non-English server deployment job within the same folder, and then modify the Erase
ProLiant ML/DL/BL Array Configuration {LinuxPE} job. For more information on
modifying the job, see “Creating server deployment job folders” (page 30).
An infrastructure service has been deleted, but I did not delete it
An infrastructure service has been deleted, but I did not delete it.Issue
Matrix infrastructure orchestration may be configured to remove infrastructure services when the
lease period expires. When an infrastructure service lease period expires and the service is deleted,
Possible cause
My History and Request Details displays a message stating the owner initiated the delete process
even though the delete process was triggered by the lease period expiring.
Email notices of lease expiration and service deletion can be sent one week, and then one day, in
advance of the event. The emails are sent to the address set in the Operations Orchestration System
Action
Property: HpioNotificationRecipients. Use Operations Orchestration Studio to set this
configuration parameter.
Service deletion 179