ProLiant DL320 Security Server Quick setup poster

ManualsBrandsHP ManualsSoftwareMicrosoft Internet Security and Acceleration (ISA) 2004 SW

1 Introduction

The HP ProLiant DL320 Security Server is factory prepared to

protect your networks and allow secure Internet access.

Use this quick setup poster to help set up the ProLiant DL320

Security Server.

HP highly recommends following the instructions in this quick

setup poster to the end. This poster quickly guides you from

opening the box to setting your initial custom firewall policy.

2 Checking the package contents

The package contains the following items in addition to the

items listed in the server documentation:

• Recovery CDs

• HP ProLiant DL320 Security Server User Guide

• HP ProLiant DL320 Security Server Network

Information Card

• This quick setup poster

3 Verifying your network

information

Use the HP ProLiant DL320 Security Server Network Information

Card to record the network details needed during setup.

4 Connecting to the server

Item Description

1 NIC port 1 (internal network)

2 NIC port 2 (external network)

3 NIC port 3 (perimeter network, optional)*

* NIC 3 will be installed in either PCI-X expansion slot 1 or 2,

depending on the type of NIC.

NOTE: The ProLiant DL320 Security Server is set to

maximum security by default, actively defending the

network from the instant network communications starts.

For more information about this feature, see the

ProLiant DL320 Security Server User Guide.

1. Plug one end of cable 1 into the internal port of the

ProLiant DL320 Security Server, and plug the other end into

the internal network hub or switch.

2. Plug one end of cable 2 into the external port of the

ProLiant DL320 Security Server, and plug the other end into

the Internet-connected router or modem.

3. To use a perimeter network, plug one end of cable 3 into

the perimeter port of the ProLiant DL320 Security Server,

and plug the other end into your perimeter network hub

or switch.

4. Connect a monitor to the VGA port of the ProLiant DL320

Security Server.

5. Connect a keyboard and a mouse to the keyboard and

mouse ports.

6. Plug the computer end of the power cord into the server

power inlet, and plug the other end into an appropriate

power source.

5 Powering on the server

Power up the ProLiant DL320 Security Server. See the server

hardware documentation for additional information.

HP ProLiant DL320

Security Server

Quick setup poster

6 Completing the server setup

After powering on the ProLiant DL320 Security Server, the

Microsoft

Windows Server™ 2003 dialog box displays. It

might take a few minutes for the server to initialize.

1. At the Welcome to the Windows Setup Wizard page, click

Next.

2. At the Regional and Language Options page,

follow the instructions to set the regional and language

options or to use the default language, which is English

(United States), and then click Next.

Continued on reverse

First Edition (February 2006)

Part Number 411246-001

Summary of content (4 pages)

PAGE 1
HP ProLiant DL320 Security Server Quick setup poster 1 Introduction 4 Connecting to the server 6 Completing the server setup After powering on the ProLiant DL320 Security Server, the Microsoft® Windows Server™ 2003 dialog box displays. It might take a few minutes for the server to initialize. The HP ProLiant DL320 Security Server is factory prepared to protect your networks and allow secure Internet access. Use this quick setup poster to help set up the ProLiant DL320 Security Server.
PAGE 2
HP ProLiant DL320 Security Server Quick setup poster 1 Introduction 4 Connecting the server 6 Completing the server setup After powering on the ProLiant DL320 Security Server, the Microsoft® Windows Server™ 2003 dialog box displays. It might take a few minutes for the server to initialize. The HP ProLiant DL320 Security Server is factory prepared to protect your networks and allow secure Internet access. Use this quick setup poster to help set up the ProLiant DL320 Security Server.
PAGE 3
. At the Computer Name and Administrator Password page: a. In the Computer name text box, enter the computer name recorded on the network information card. b. In the Administrator password text box, enter the administrator password created as part of completing the network information card. The administrator password is used to obtain administrator privileges to manage the ProLiant DL320 Security Server. c. In the Confirm password text box, enter the administrator password again, and click Next. 5.
PAGE 4
3. At the Computer Name and Administrator Password page: a. In the Computer name text box, enter the computer name recorded on the network information card. b. In the Administrator password text box, enter the administrator password created as part of completing the network information card. The administrator password is used to obtain administrator privileges to manage the ProLiant DL320 Security Server. c. In the Confirm password text box, enter the administrator password again, and click Next. 5.