Security Guide

HP ProLiant DL320 Security Server
Network Information Card
Overview
Before connecting the HP ProLiant DL320 Security Server to the network,
record the configuration information for your environment in the space
provided.
After recording the configuration information, proceed to step 4 of the
ProLiant
DL320 Security Server Quick Setup Poster.
Internal network interface IP setup
The internal network interface (NIC 1) of
the ProLiant DL320 Security Server is
the interface assigned to
internal network traffic.
• Internal network interface IP
address: ___________________________
• Subnet mask: _______________________________________________
• Preferred DNS server: ________________________________________
• Alternate DNS server: ________________________________________
NOTE:
If you have more than two DNS servers or any WINS servers,
enter their IP addresses after the ProLiant DL320 Security Server Setup
Wizard completes.
External network interface IP setup
The external network interface (NIC 2) of
the ProLiant DL320 Security Server is
the interface assigned to external network
traffic. If you have a public static IP
address (assigned by the DNS server), en
ter this information during setup.
• External network interface IP
address: ___________________________
• Subnet mask: _______________________________________________
• Default gateway: ____________________________________________
Perimeter network interface IP setup
The perimeter network interface (NIC 3)
of the ProLiant DL320 Security Server
is optional. The interface is connected
to the perimeter network (also known as
the DMZ). If you have a DHCP server and
intend to automatically assign an IP
address to NIC 3, there is no need to
provide the address during setup.
Perimeter network interface IP address: ______________________
_____
Computer name
The ProLiant DL320 Security Server mu
st be assigned a computer name. The
computer name must be 15 alph
anumeric characters or less.
Computer name: _____________________________________________
Administrator password
The administrator password is the password used to log on to the ProLiant
DL320 Security Server. Define the admi
nistrator password during setup using
at least six characters and a mix of up
percase and lowercas
e letters, numbers,
and non-alphanumeric characters
(for example, !, $, #, %).
NOTE:
For security reasons, HP recommends destroying any hard
copy notes taken to memorize this pa
ssword as soon as possible or
storing the notes in a safe place.
Workgroup or domain name
Record the name of the workgroup or doma
in that will be joined during setup.
Workgroup or domain name: ___________________________________
NOTE:
A domain can be joined anytime after setup completes.
© Copyright 2006 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to ch
ange without notice. The only warranties for HP
products and services are set forth in the ex
press warranty statements accompanying such
products and services. Nothing herein should be co
nstrued as constituting an additional warranty.
HP shall not be liable for technical or editorial errors or omissions
contained herein.
Confidential computer software. Valid license fr
om HP required for possession, use or copying.
Consistent with FAR 12.211 and 12.212, Commercial Co
mputer Software, Computer Software
Documentation, and Technical Data for Commercial
Items are licensed to the U.S. Government
under vendor’s standard commercial license.
February 2006 (First Edition)
Part Number 411247-001