A9899A and A9900A PCI-X 2-Port Gigabit Ethernet Card Installation Guide

HP CONFIDENTIAL Codename: Mt. Diablo/Orca Part Number: Last Saved On: 2/11/04 2:01 PM DRAFT COPY

• The red X over one of the network icons indicates that it is not connected to your

network. Connect the adapter to your network using an appropriate cable (Category 5

UTP or fiber optic cable). Once the adapter is connected to a viable network, the

operating system removes the red question mark.

Ping a Host on the Ne

twork

Once the operating system indicates that all the adapters are properly connected to the

network, ensure that the adapter IP addresses are consistent with your network. Perform the

following steps:

• Click Start>Run to open the Run dialog box.

• Type cmd in the Run dialog box to start the command prompt.

At the prompt, type ipconfig. This command displays all the IP addresses, subnet masks,

and default gateways of the server.