Version Control Installation Guide

Installing silently using the CLI

To install silently using the CLI:

From a command prompt, enter the following command:

component name /silent

For example, you might enter c:\>cp00xxxx.exe /silent.

c:\>cp00xxxx.exe /s

Note: Be sure to configure the VCA component using the HP Smart Update Manager before installing it to

remote systems. If the component is not configured, the VCA displays an

unknown

status.

Alternatively, VCA can also be installed silently using the HP Smart Update Manager.

To install the VCA silently using the HP Smart Update Manager:

1. Execute the cpfiles.exe available in the HP SmartStart CD at the location: compaq\csp\nt

2. Extract the contents to the location on the system where you want to install the VCA.

3. From the same location, execute the following command in the command prompt:

hpsum /s cp00xxxx.exe

24 Installing the VCA on Windows operating systems