Version Control Installation Guide

d. In the VCRM Login User Password field, enter the password for the user name specified in Step
7.c.
e. Click OK to complete the VCRM configuration.
8. To install:
a. Select the HP VCA for Linux component, and click on the Install button.
b. To install the VCA as a single component, Click on Deselect All button. Select only the HP VCA
for Linux component, and click on the Install button.
NOTE: If the System Management Homepage is not already installed, then select HP SMH
component for installation.
NOTE: The VCA component can also be installed by invoking from the shell prompt:
For example, ./hpsum -c hpvca-6.1.x-x.*linux.rpm
Pre-configuring and installing the Windows VCA component using HP
Smart Update Manager
This process installs the component with the configurations that are provided through the HP Smart Update
Manager.
To pre-configure the Windows VCA component using HP Smart Update Manager:
1. From the Integrity or ProLiant Support Pack for Windows, run hpsum.exe. The HP Smart Update
Manager Source Selections screen appears.
2. Click on Start Inventory button. The Select Installation Host(s) screen appears when the inventory
process is complete.
3. Select the Installation Host, and click Next to start the discovery process.
4. After the Discovery Process is complete, the Select Bundle Filter screen appears.
5. Select the appropriate bundle for the Operating System. Click OK. The Select Items to be Installed
screen appears.
6. Select the HP VCA for Windows component.
7. To pre-configure:
a. Click on Configure Now link next to the VCA component in the Optional Actions column. The
Version Control Agent Setup screen appears.
b. In the Computer Name field, enter the VCRM system name.
c. In the Login Account field, enter the System Management Homepage user name having
administrator or operator or user privileges for the VCRM system.
d. In the Password field, enter the password for the user name specified in Step 7.c.
30 Installing the VCA using the HP Smart Update Manager