Implementing RemoteFX on HP ProLiant Servers

Figure 1: Power connectors

Single GPU

To install a single GPU, follow these steps and read the HP ProLiant DL/ML370 G6 Servers Graphics card

power cable kit Installation Instructions. The installation instructions are available at

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02475365/c02475365.pdf.

1. Insert the GPU into slot 3.

2. Read the HP ProLiant DL/ML370 G6 Servers Graphics card power cable kit Installation Instructions

and select the cable with the pin connector that matches your GPU. The installation instructions are

available at

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c02475365/c02475365.pdf.

3. Connect the end of the cable labeled “Graphics Card” to the GPU.