User's Manual
Table Of Contents
- HP Moonshot Switch User and Maintenance Guide
- Abstract
- Notice
- Contents
- Component and LED identification
- Operations
- Setup
- Configuration
- Troubleshooting
- Illustrated parts catalog
- Removal and replacement procedures
- Regulatory information
- Electrostatic discharge
- Support and other resources
- Acronyms and abbreviations
- Documentation feedback
- Index
Component and LED identification 11
iLO CM management port
The iLO CM management port provides communication with the switch service port interface and is used for
remote sessions. All service port traffic is routed through the iLO/MGMT port, located on the iLO CM module:
The switch service port interface is enabled by default and can be used with the switch serial console port
when making configuration changes.
The switch serial console port is on the uplink module. To identify the switch serial console port, see uplink
module components (on page 7, on page 6).
To find the switch service port IP address for remote management, see "Obtaining the switch management IP
address (on page 28)."