User's Manual

1. Click Actions→Boot options. The Select boot options page displays.
2. In the Select boot order section, select the following:
• Boot device 1—The primary device to seek on boot.
• Boot device 2—The secondary, or backup, device to seek on boot if the primary device
is not present or contains no boot instructions.
3. In the Select boot once section, select a device to seek on boot for the next boot only. Boots
subsequent to the next boot revert back to the Boot device 1 and 2 settings.
4. In the Select boot options section, select from the following:
• CPU speed—Select a speed for the CPU to adopt on the next boot. Unsupported cartridge
nodes show N/A in this menu.
• Wake-On-LAN (WOL)—Enable or disable WOL for the node. The selection becomes
active on the next boot. If this option is unsupported, the selections are unavailable. A
third option, do not apply, appears only when multiple nodes are selected, allowing you
to skip enabling or disabling the setting when it’s supported.
• BIOS serial console (BSC)—Enable or disable access to the BSC. The selection becomes
active on the next boot. If this option is unsupported, the selections are unavailable. A
third option, do not apply, appears only when multiple nodes are selected, allowing you
to skip enabling or disabling the setting when it’s supported.
5. Click Apply to assign the chosen settings, or click Cancel.
24 Using the web interface to view Moonshot System details