User's Manual

such as c6–10, or multiple specific cartridges, such as c6,8,10. Enter all to upload
a firmware file to all cartridges.
• Switches—Specify the switch. To target a single switch, enter sA, or sB. To target both
switches, enter sA,B or sA-B.
6. (Optional) For switch firmware updates, you must enable TFTP from the iLO CM firmware
command line before the next step.
Switch firmware updates require TFTP to copy the firmware update files to the switch.
IMPORTANT: Firmware updates are supported on the HP Moonshot-45G and HP
Moonshot-180G Switch Modules. Remember to disable TFTP after switch firmware updates
are complete as good security policy.
7. Click Install. A meter displays to show the upload progress.
Installing files from the Chassis Manager Repository
Files that have already been uploaded to the Chassis Manager Repository can be used to update
component firmware.
To install firmware from the Chassis Manager Repository:
1. Select the firmware file in the Uploaded Files list.
2. Specify the applicable component to flash in the Targets (optional) field:
• Chassis—Chassis firmware updates do not require targets.
• Cartridges—Enter the applicable cartridges targets using c<x> notation. For example,
to apply an upload to cartridge 6, enter c6. You can also specify a range of cartridges,
such as c6–10, or multiple specific cartridges, such as c6,8,10. Enter all to upload
a firmware file to all cartridges.
• Switches—Specify the switch. To target a single switch, enter sA, or sB. To target both
switches, enter sA,B or sA-B.
NOTE: Select Force if a message displays requiring the use of the force command.
3. (Optional) For switch firmware updates, you must enable TFTP from the iLO CM firmware
command line before the next step.
Switch firmware updates require TFTP to copy the firmware update files to the switch.
IMPORTANT: Firmware updates are supported on the HP Moonshot-45G and HP
Moonshot-180G Switch Modules. Remember to disable TFTP after switch firmware updates
are complete as good security policy.
4. Click Install.
A meter displays to show the installation progress.
5. (Optional) When finished installing a file from the Chassis Manager Repository, select the file
in the Uploaded Files list and then click Remove to delete the file from the iLO CM Repository.
Managing iLO CM firmware user accounts
The iLO CM firmware enables you to manage user accounts stored locally in secure memory.
You can create up to 12 local user accounts with custom login names and advanced password
encryption. Privileges control individual user settings, and can be customized to meet user access
requirements.
The Administrator privilege is required for adding, modifying, and deleting users. If you do not
have this privilege, you can view your own settings and change your own password.
Managing iLO CM firmware user accounts 41