User's Manual

2. Select IPv4 in the View menu in the upper left corner of the page, or click the More link in the
IPv4 summary section.
The following information is displayed:
• IPv4 address
◦ IPv4 address—The IPv4 address currently in use. If the value is 0.0.0.0, the IPv4
address is not configured.
◦ Subnet mask—The subnet mask of the IPv4 address currently in use. If the value is
0.0.0.0, no address is configured.
◦ Default gateway—The default gateway address in use for the IPv4 protocol. If the
value is 0.0.0.0, the gateway is not configured.
◦ DHCPv4—Indicates whether DHCP is enabled for IPv4.
◦ Ping gateway on startup—Causes the iLO CM Firmware to send four ICMP echo
request packets to the gateway when the Moonshot 1500 CM module initializes.
This ensures that the ARP cache entry is up-to-date on the router responsible for routing
packets to and from the Moonshot 1500 CM module.
• DHCPv4 options—This section lists the following DHCPv4 options and whether they are
enabled or disabled:
◦ Use gateway
◦ Use domain name
◦ Use DNS servers
◦ Use WINS servers
◦ Use NTP servers
◦ Use static routes
• Static routes
◦ Static route #1—The static route 1 destination, mask, and gateway addresses.
◦ Static route #2—The static route 2 destination, mask, and gateway addresses.
◦ Static route #3—The static route 3 destination, mask, and gateway addresses.
• DNS
◦ Primary DNS server—The primary DNS server address.
◦ Secondary DNS server—The secondary DNS server address.
◦ Tertiary DNS server—The tertiary DNS server address.
◦ DDNS registration—Specifies whether the Moonshot 1500 CM module registers its
IPv4 address and name with a DNS server.
• WINS
◦ Primary WINS server—The Primary WINS server address.
◦ Secondary WINS server—The Secondary WINS server address.
◦ WINS registration—Specifies whether the Moonshot 1500 CM module registers its
name with a WINS server.
Managing network settings 51