5.5 PatchiX Training

the Qualify Patches screen and press the [Return] Key. Note: some information is
available about the patches from the View Patches screen, but much of it is static
information that does not consider your environment.
The detailed information screen has several information views that are available. Each
view has a number associated with it as follows:
You can select a view by typing the view number, or pressing the Previous View [f5] and
Next View [f6] buttons. For more information about the type of information available see
the section entitled Viewing Detailed Patch Information.
Figure 5-2. Patch detail, Summary View.
View(1) = Summary: Describes the basic properties of the patch and provides additional
details about the qualification results. Figure 5-2, above, provides an example of the
Summary view of the patch detail for MPEHX23A. This view tells you the basic
properties of the patch. The information available in this view is as follows:
• The qualification status of the patch.
• Whether or not the patch is already installed on the system (and if a re-install is
required).
• The Hewlett-Packard patch recommendation.
• The patch installation requirements (i.e. whether an update from CSLT is needed.)
• The patch criticality value.