5.5 PatchiX Training

Figure 6-5. Qualify Patches Screen
To remove this patch from the list of qualified patches you return to the Qualify Patches
screen (see Figure 6-5 above) and Veto the patch by pressing the Veto [f2] or V key.
Next you press the [f4] key to re-qualify the changes since the last qualification. The
patch qualification status should change to No. If the status changes to No, all patches
that depend on this patch for installation will also be set to No. If not then check for the
description of (veto overridden by qualifier) in the previous section.
Patch Force
In some cases HP Patch/iX may disqualify a patch that you feel should be installed on
your system. For this reason HP Patch/iX provides the Force functionality. The most
common use of the Force functionality is to force enhancements on the system.
Remember that enhancements are disqualified by default if they came from a PowerPatch
tape.