Accessing Files Programmer's Guide (32650-90885)

Chapter 13 169
Maintaining File Security
Access Control Definition Security (ACD)
Log of system logging configuration
This log gives you an audit trail of changes to the logging configuration. This log is initially
enabled (ON). The following is the log record format:
Log of restore
This log traces file restorations. Files can be restored from tape or serial disk to the
system. This log type is initially disabled (OFF). It can be enabled by SYSGEN followed by
a START command. The following is the log record format:
Table 13-2. Type 135 Record Format
Length, in 16-bit
words
Record Content
1 Record type (135)
1 Record length
1 Process identification number
3 Time stamp
2 Job type/job number
1 (Reserved)
1 LDEV number
4 System logging masking words
8 User name
8 Group name
8 Account name
8 job or session name
Table 13-3. Type 136 Record Format
Length, in 16-bit
words
Record Content
1 Record type (136)
1 Record length
1 Process identification number
3 Time stamp
2 Job type/job number
8 File name
8 File group
8 File account