iX 6.5)

Chapter 3 47

Telnet Service

Verifying Installation of Telnet Files

If you have installed or updated to version C.60.00 of MPE/iX, use the

following steps to verify that the Telnet software exists on your system:

1. If necessary, log on the system as MANAGER.SYS.

2. Run NMMAINT to verify that you have successfully installed the

Telnet ﬁles.

:NMMAINT,72

You will see information similar to the following.

NMS Maintenance Utility 32098-20014 B.00.09 (C) Hewlett Packard Co. 1984

THU, JAN 18, 1996, 1:39 PM

Data comm products build version: N.55.08

Subsystem version ID's:

HP TELNET/iX Subsystem HP32040A module versions:

NM program file: TELNET.ARPA.SYS Version: A5500000

NL procedure: PTD_SM_VER Version: A5500000

NL procedure: PTD_HANDLER_VER Version: A5500002

NL procedure: PTD_PTID_VER Version: A5500001

NL procedure: PTD_PTOD_VER Version: A5500001

NL procedure: PTD_COMMON_VER Version: A5500000

HP TELNET/iX Subsystem HP32040A overall version = A.55.00

3. Check the ﬁnal line of the display to make sure there are no error

messages such as a module is missing or there is a version

mismatch. For example:

Version levels differ in one or more modules. (NMERR 103)

HP TELNET/iX Subsystem HP32040A overall version = ?.??.??

4. Issue a LISTGROUP command for ARPA.SYS to verify that its

capabilities are PM, PH, IA, and BA.

5. Issue a LISTF command for the Telnet ﬁles in ARPA.SYS to verify

that ANY (anyone) can read TELNTDOC.ARPA.SYS and that ANY

(anyone) can read and execute TELNET.ARPA.SYS. Enter:

:LISTF TEL@.ARPA.SYS,3