Dictionary/3000 Reference Manual (32244-90001)

148 Chapter5
Dictionary/3000 Utilities
DICTDBA
The following prompts are then issued to identify the database to be audited:
BASE>
BASE PASSWORD>
MODE>
Enter the name of the database in response to the BASE prompt, and enter a password
that grants read access to the entire database in response to the PASSWORD prompt. If an
incorrect password is entered, the prompt is reissued. Pressing [[RETURN]] in response to
the prompt for BASE terminates the utility.
Enter the access mode to be used to open and read the database in response to the MODE
prompt. If [[RETURN]] is pressed in response to this prompt, the database will be accessed
in the default mode, which is 5. (See the IMAGE Reference Manual for details on “Access
Modes”.) Note that when DICTDBA is run, the database will be locked on the data set
level, unless the database is opened in modes 3, 7, 8.
DICTDBA will then begin to execute the report.
The following examples show how to execute DICTDBA and briefly explain the responses
given to the prompts.
Example
The following is an example of a SYNONYM report:
:RUN DICTDBA.PUB.SYS Executes the audit utility.
<The Dictionary/3000 DB Auditor program banner appears here.>
RUN MODE(SYNONYMS/CHAINS/LINKS)> S Select S for SYNONYM run mode.
BASE> SHPMGT Name of database to be audited.
BASE PASSWORD> Password is not displayed; MANAGER
was used.
MODE> [[RETURN]] entered; opens database
in default access mode 5.
The Terminal SYNONYMS report is generated as follows:
PRODUCT-MASTER M: 22/101 [21%] Set name; set type; current number
of entries/set capacity; capacity
usage percentage.
PO-MASTER A: 0/311 [0%]
ITEM-MASTER M: 44/311 [14%]
END OF PROGRAM
The Line printer SYNONYMS report is generated as follows:
RUN MODE: SYNONYMS Identifies run mode selected.
BASE: SHPMGT.PUB.HOWE Identifies the selected base.
PRODUCT-MASTER M: 22/101 [21%] Same information as terminal
report.