Dictionary/3000 Reference Manual (32244-90001)

304 AppendixB
UTILITY Error Messages
DICTDBL Messages
DICTDBL Messages
Errors
MESSAGE EXPLANATION AND/OR ACTION
*ERROR: BAD DATA BASE NAME:
base-name
The utility has encountered an invalid base
name format in the store file. Probably the store
file has bad data in it.
*ERROR: BASE LONGER THAN 6
CHARACTERS
Base name exceeds 6 characters.
*ERROR: BASE NAME TOO LONG Data base name, including qualifiers, exceeds 24
characters.
*ERROR: DATA BASE OPERATION A data base error occurred during the load. A
“DBEXPLAIN message block” is issued to
explain the error condition.
*ERROR: DEFERRED MODE REJECTED,
CODE=n
The request for fast I/O has been rejected with
an error code of “n”. Refer to the DBCONTROL
intrinsic in the IMAGE Reference Manual for an
explanation.
*ERROR: FILE EQUATION NOT
ALLOWED
A back-referenced file name (*filename) entered
as a response to the STORE FILE prompt is not
allowed.
*ERROR: FILE NAME TOO LONG Response to the LIST FILE prompt is greater
than 26 characters.
*ERROR: INCOMPATIBLE STORE FILE The store file is incompatible with the current
release of the utility.
*ERROR: INCORRECT STORE TAPE
MOUNTED
The tape mounted is not the correct store tape.
Mount the correct tape.
*ERROR: INCORRECT TAPE NUMBER: n The given tape number “n” is out of sequence.
Mount the correct tape.
*ERROR: INVALID MODE Response to MODE prompt is a number other
than 1 through 8.
*ERROR: INVALID RUN MODE Response to the RUN MODE prompt is invalid.
Enter one of the modes indicated in the prompt.
*ERROR: ITEM CONVERSION A conversion error occurred on an item with
properties that have changed in the new data
base schema. The item data field is set to a null
value of all binary zeros.