Dictionary/3000 Reference Manual (32244-90001)

Appendix C 321
DICTIONARY/3000 Initialization Procedure
Overview
DESCRIPTION-TEXT will have capacity 5000
REPORT-LIST will have capacity 200
Are the capacities correct? (Y/N) >y
Password for MANAGER access >DICTMGR
Password for PROGRAMMER
access > Entering RETURN indicates that there will be no access
to the dictionary at these levels.
Password for INFORM access >
Password for DOCUMENTATION access >
Password for REPORT access >
Password for MANAGER access will be DICTMGR Listing of passwords
There will be no PROGRAMMER access allowed assigned.
There will be no INFORM access allowed
There will be no DOCUMENTATION access allowed
There will be no REPORT access allowed
Are the passwords correct? (Y/N) >y
USER PASSWORD >
ACCOUNT PASSWORD >LOCKIT
GROUP PASSWORD >
#J36
END OF PROGRAM
:
FROM/<your account>/DICTINIT IS COMPLETE Program is complete; your
dictionary is initialization.
This example shows a dictionary re-initialization. That is, there is already a
data-dictionary in your group, and you want to resize it and/or change the passwords to
access it.
:RUN DICTINIT.PUB.SYS How to execute the program.
<The Dictionary/3000 initialization program banner appears here>
Initialization/Re-initialization (I/R) Select “R” to re-initialize an existing dictionary.
>r
USER PASSWORD > If logon passwords were used,
enter them in response to these prompts.
ACCOUNT PASSWORD >
GROUP PASSWORD >
Dictionary store file on Tape or Disk(T/D) >d