How to Display Vital Product Data for SCSI-FC Router

Hewlett-Packard SCSI-Fibre Channel Router Installation and User Guide

Revision 2.1.0 Page

5.1.4.1.2 ‘1’: Display VPD

This function is used to display important information (Vital Product Data) for attached

SCSI-FC Router. See Figure 5-9 “VPD Screen”. In this function, an attached SCSI-FC

Router is referred to as the local SCSI-FC Router.

Figure 5-9. VPD Screen

1. To display the VPD screen of the local SCSI-FC Router, enter the number one ‘1’.

2. Product Type – The first line describes the use of the local SCSI-FC Router.

• SCSI-FC Router H - An ‘H’ represents host router.

• SCSI-FC Router D - A ‘D’ represents a device router.

3. SCSI-FC Router H/D Firmware Revision – These screen items provide the

firmware/microcode revision level and the date and time of development for the

respective routers.

4. Loader Revision – displays the local SCSI-FC Router’s loader revision level (for

internal use only).

5. Unique ID – displays the local SCSI-FC Router’s unique ID assigned by the

manufacturer.

6. Unit Serial Number – displays the local SCSI-FC Router’s Unit Serial Number.

7. PCB Number - displays the local SCSI-FC Router’s Printed Circuit Board number

(for internal use only).

8. DIP SW1 = 0000101 DIP SW2 = 1111111 – displays the DIP switch setting of

SW1 and SW2.