HP Telnet/iX User's Guide (36957-90156)

Chapter 4 41
Accessing the Telnet/iX Server
Exiting the MPE Session
Exiting the MPE Session
While connected to the HP 3000, you can check the status of your
connection at any time:
node3000(PUB): [CTRL]-]
telnet> status
Connected to node3000.cup.hp.com
Operating in character-at-a-time mode.
Escape character is “^]”
To close any open MPE session and exit the Telnet/iX Server, use the
MPE BYE command; or the Telnet client CLOSE command or the Telnet
client QUIT command.
node3000(PUB):bye
CPU=3. Connect=1. TUE, JAN 16, 1996, 10:26 am.
Connection closed by foreign host.
/usr:
or
node3000(PUB): [CTRL]-]
telnet> close
/usr:
or
node3000(PUB): [CTRL]-]
telnet> quit
/usr: