Read Before Installing MPE/iX Release 6.5 Non-Platform Software Release (C.65.00) (30216-90292)

Chapter 1 11
Information You Need Before Installing MPE/iX 6.5 Release
Release Notes
1 Information You Need Before
Installing MPE/iX 6.5 Release
Release Notes
Before beginning installation or update, please review this section which includes
information about the following CR topics.
• FSCHECK
• TERMDSM
• SYSGEN
• NSINFO
FSCHECK.MPEXL.TELESUP
CR#s JAGac40897 and JAGac40344
There are two harmless outstanding issues regarding the FSCHECK utility. The first is
documented by problem report number JAGac40897; the FSCHECK version number has not
been updated from 6.0, even though internal updates have been made to the utility.
The second problem is documented by problem report number JAGac40344, an extraneous
error message is displayed at the end of the output of the FSCHECK HELP command. This
error message can simply be ignored. In both cases, there is no action required on the
behalf of the user. This information is provided on a “for your information” basis, and can
safely be ignored.
TERMDSM
CR# JAGac86424
There is a harmless outstanding issue regarding the output of TERMDSM that is documented
in CR# JAGac86424.
When you run nmmain, t the output contains the following message:
MPE iX Terminal I/O 32022C module versions:
NM program file: TERMDSM.DIAG.SYS ** NOT INSTALLED **
CM program file: TTUTIL.PUB.SYS Version: C0300000
NL procedure: TIO_ATSM_VER Version: C0300009
NL procedure: TIO_APSM_VER Version: C0300002
This error can simply be ignored and no action is required on behalf of the user. This
problem will be fixed in a later release.