Using NS3000/iX Network Services (36920-90008)

164 Chapter 8

NetCI

Conﬁguring Network Data

Figure 8-2 shows an internetwork that includes three networks (NET1,

NET2, and NET3) connected together. We will use NET3 as the sample

LAN network for our discussion. NET3 shows six nodes connected

together by a LAN. NetCI is installed on node K, which is the

management node.

Figure 8-2 Sample Internetwork

Conﬁguring Logon Information

NetCI establishes multiple remote sessions on one or more nodes when

executing a particular command or running a program. Before remote

logon sessions can be established, system and logon information for

each node must be stored in the NetCI internal data structure.

To conﬁgure each node, use the following commands:

• NEWNODE to conﬁgure each node and its logon sessions.

• ALTNODE to change the node’s logon information.

• PURGENODE to delete a node from conﬁguration

You can then use the SHOWNODE command to list all the nodes and logon

sessions that you conﬁgured, and to check whether you correctly

changed a node’s logon information or deleted a node. Refer to the

commands on the following pages for more speciﬁc details.