Using NS3000/iX Network Services (36920-90008)

Chapter 8 169
NetCI
ALTNODE
ALTNODE
Changes the NetCI node name and logon information in the user’s
NetCI configuration for an NS 3000 node.
Syntax
ALTNODE node logon [;dsline=NS nodename]
Parameters
node NetCI name of the node whose logon information is to
be changed.
logon New logon identification which is a valid logon
sequence in the form:
username[/userpass].acctname[/acctpass][.groupname/
grouppass];dsline=NS nodename
For information on additional MPE logon parameters
and options, refer to the MPE/iX Commands Reference
Manual.
NS nodename If the NetCI name (specified in the node field) is the
same as the NS 3000 node name, leave this field blank.
If the NetCI name is not the same as the NS 3000 node
name, specify the NS node name in the NS 3000
network.
Examples Example 1
This example changes the user of the logon session for node I. The
remote environment for NetCI node I remains as previously configured,
which is node I (the default environment), so it is not necessary to enter
the same remote environment information again.
NetCI>ALTNODE I NETADMIN.SYS/BRIE
Example 2
This example changes the user of the logon session for the NetCI node
PINOIT whose remote environment remains as previously configured
which is node Y (the default environment). However, it is necessary to
enter the NS nodename again since it is not the same as the NetCI node
name.
NetCI>ALTNODE PINOIT NETADMIN.SYS/NET3K;DSLINE=Y
Example 3
This example changes the remote environment for the NetCI node
CHABLIS to NS node L.