Using NS3000/iX Network Services (36920-90008)

182 Chapter 8

NetCI

Interrupting Processing (Using [BREAK])

On MPE/iX machines, type [BREAK] twice to return to the MPE prompt.

On MPE V machines, type

[BREAK] once to return to the MPE prompt.

Pressing

[BREAK] sends a signal to NetCI to interrupt the process. This

signal also passes through a “virtual” terminal to the remote process so

that both the local and remote processes are suspended. To resume the

local process, type RESUME which displays the current NetCI> prompt.

After receiving the NetCI> prompt, type RESUME again to resume the

process that was suspended on the remote node. The prompt for the

suspended process will be displayed. In summary, if you execute a

command on a remote node, type RESUME twice to return to where you

were when you pressed

[BREAK].