Using NS3000/iX Network Services (36920-90008)

Appendix B 225
Migration From DS/3000 to NS 3000/iX Network Services
Conversion Checklist: DS/3000 to NS 3000/iX
Conversion Checklist: DS/3000 to
NS 3000/iX
Identify applications using Program-to-Program Communications
(PTOP). PTOP is not supported, so any PTOP applications must be
converted so that they can run on an MPE/iX based machine. If you
wish to convert your PTOP applications so that they can run on NetIPC
and RPM, refer to the conversion procedures in the NetIPC 3000/iX
Programmer’s Reference Manual.