HP Pascal/iX Reference Manual (31502-90022)

12- 4
NOTE File name parameters have different syntax on the HP-UX and MPE/iX
operating systems. See the HP Pascal/iX Programmer's Guide or the
HP Pascal/HP-UX Programmer's Guide .
HP Standard Options
HP Standard compiler options are available on all versions of Pascal that
run on HP computers. They are part of the HP Standard. An HP Pascal
program containing only HP Standard options can be compiled by any Pascal
compiler that runs on an HP computer.
HP Pascal Options
HP Pascal compiler options are not required by the HP Standard, but are
available in HP Pascal. An HP Pascal program containing HP Pascal
options must be compiled by the HP Pascal compiler.
System Programming Options
System programming compiler options are only available if the compiler
specifies $STANDARD_LEVEL 'EXT_MODCAL'$ or $STANDARD_LEVEL 'HP_MODCAL'$
(see "STANDARD_LEVEL" compiler option for more information).
System-Dependent Options
System-dependent options either work on only one operating system, or
they work differently on HP-UX and MPE/iX. Figure 12-2 diagrams the
three categories of system-dependent options.
Figure 12-2. Categories of System-Dependent Compiler Options
The system-dependent options are:
MPE/iX Only MPE/iX and HP-UX HP-UX Only
CALL_PRIVILEGE INCLUDE CONVERT_MPE_NAMES
EXEC_PRIVILEGE INCLUDE_SEARCH GPROF
FONT NLS_SOURCE HP_DESTINATION 'ARCHITECTURE
HP3000_16 SYMDEBUG HP_DESTINATION 'SCHEDULER
HP3000_32 SHLIB_CODE
RLFILE SHLIB_VERSION
RLINIT