Legato Networker ClientPak and Storage Node User's Guide

54
Appendix A: Error Messages
A
Error Message:
filter_mpe_volsets failed
Displayed in the following NetWorker programs:
NSRSAVE, NSRARCH
Cause:
NetWorker found a temporary memory problem.
Solution:
Try one of the following solutions:
• Retry the command.
• Reboot the host system.
Error Message:
/<invalid_mpe_volset_id>_VOLUME_SET: invalid NetWorker volume
set identifier or /<invalid_system_volume_set_id>
Displayed in the following NetWorker programs:
NSRSAVE, NSRARCH
Cause:
You specified an invalid MPE/iX volume set name after the required leading slash
(/) and, in the case of nonsystem volume sets, before the required suffix tag
(_VOLUME_SET).
Solution:
Insert the valid MPE/iX volume set name in the expected NetWorker format:
/MPEXL_SYSTEM_ VOLUME_SET
or
/<valid_mpe_volset_id>_ VOLUME_SET
for example,
/PROD_ VOLUME_SET for an MPE/ix volume set named "PROD".
Error Message:
mpevs_init failed
Displayed in the following NetWorker programs:
NSRSAVE, NSRARCH, NSRRECOV, NSRRETRV, SAVEFS
Cause:
NetWorker found a memory or volume set management problem.
Solution:
Try the following in descending order of preference:
• Retry the command.
• Remount the non-system volume sets, ensure they are usable, and reboot the host
system.
• If all volume sets seem to be usable using test MPE/iX commands and the
problem persists, contact Legato Technical Support.
Table 4. Error Messages (Continued)