VISTA Plus for MPE User's Guide

Chapter 3
3-40
Configuration Options
The Config Options window is displayed as a result of selecting Configuration Options from the
VISTA Functions window. This window allows you to configure VISTA to your environment.
The Config Options window can be used to alter default configuration values. Turn to the following
section for information on the various values you can enter.
To modify a value, use the up and down arrow keys to position the cursor on the name of the field
to modify, and press Enter or F4, Modify Option. The cursor is placed on the field value. Enter
the field value, and press Enter.
To save your changes, press F6, Save Changes. To close the Config Options window without
saving changes, press F8, Close Window.
If you want to save configuration options between sessions, copy the VISTACFG.PUB.NETBASE
file to your logon group and account. VISTA searches for this file upon start-up. If it exists, VISTA
loads the configuration values. When you save configuration changes, the configuration values are
placed in the VISTACFG file in your logon group and account. Turn to the VISTA Plus
Administrator’s Guide for more information on the VISTACFG file.
The following terminal keys can be used with the Config Options window:
Up Arrow
Press this key to position the cursor on the previous field.
Down Arrow
Press this key to position the cursor on the next field.
Tab
Press this key to position the cursor on field and accepts field value.