NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

148 Chapter7
X.25 Network Interface Configuration Screens
X.25 PVC Address Key Paths
X.25 PVC Address Key Paths
The X.25 PVC Address Key Paths screen (#163) in Figure 7-9 is
displayed when you press the
[Go To PVCPATH] function key at the General
X.25 Configuration screen (Figure 7-5). It is also displayed when you
type the path name:
@NETXPORT.NI.
NIname .PROTOCOL.X25.PVCPATH
in the Command window of any screen and press the
[Enter] key, where
NIname is a configured X.25 NI.
Figure 7-9 X.25 PVC Address Key Paths Screen
You may configure up to 128 PVC address keys under an X.25
NI, and if configuring multiple X.25 NI’s, no address key can be
used more than once per system.
Fields X.25 address
key The X.25 address key is used to identify a remote node
to which this node will communicate. The address key
can have up to eight alphanumeric characters, the first
of which must be alphabetic.
Default: None.
PVC number The PVC number is a permanent virtual circuit
number which identifies the remote host for the node
you are configuring. This number must be in the PVC