NS3000/iX NMMGR Screens Reference Manual - Edition 8 (36922-90038)

Chapter 8 179
Token Ring Network Interface Configuration Screens
Neighbor Gateways
• To change the gateway name of an existing gateway, specify the
gateway name and a new name; then press the
[Rename] function key.
The previously configured name is replaced, and the screen displays
the new name in a display field under the label Configured
Gateways.
• To delete an existing gateway, specify the gateway name; then press
the
[Delete] function key. Press the [Delete] function key again to confirm
the deletion. The previously configured name is deleted and is no
longer displayed in a display field under the label Configured
Gateways.
From this screen you proceed to the screen used to configure network
numbers of all networks reachable from this gateway node.
Fields Gateway name Enter a name to represent a gateway on this token ring
network through which one or more remote networks
can be reached. A gateway name can contain as many
as eight alphanumeric characters; the first character
must be alphabetic.
New name (Required only when renaming.) Enter a gateway
name to represent a gateway. This new gateway name
is used in place of the current gateway name for an
existing gateway configuration. The name can contain
as many as eight alphanumeric characters; the first
character must be alphabetic.