Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

Chapter 6 115
Configuring X.25 Links Step-by-Step
Modify the Network Management Configuration File
Figure 6-1 Open Configuration/Directory File Screen
1. Verify that the correct configuration file name, backup configuration
file name, and network directory file name are in the appropriate
fields
2. If you have assigned a write access password, enter it in this field. If
you are not using the password feature, leave this field blank.
3. Press the
[Open Config] key.
Fields Configuration
file name The only configuration file name the system recognizes
for use by the network subsystem is
NMCONFIG.PUB.SYS. You can, however, create or
modify a configuration file using a different name and
save it as an offline configuration file. You can use
offline configuration files as a means of creating and
storing configurations that you want to use in the
future or that you are preparing for use on a different
system. When you are ready to use an offline
configuration file, rename it as NMCONFIG.PUB.SYS,
validate within NMMGR (SYSGEN cross-validation is
done automatically within NMMGR). Use DTCCNTRL
to shutdown and restart DTS or reboot the system.