Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

118 Chapter6
Configuring X.25 Links Step-by-Step
Modify the Network Management Configuration File
used by the marketing department. The other node
(LAB.ITG.HP) is used by the lab. The domain field is the
same because the nodes belong to the same network.
The organization field is the same because the nodes
belong to the same internetwork.
Are you using
OpenView DTC
Manager? If you answer yes (Y) to this question, NMMGR
assumes you are using a PC to manage your system
and takes you to the corresponding set of screens. If you
answer no (N), NMMGR assumes you are using
host-based network management and takes you to the
set of screens required for host configuration. If you are
using this manual, you should have entered an N in
response to this question when you configured your
DTCs.
Do you have
X.25
system-to-syste
m or PAD
connections? If you answer yes (Y) to this question, NMMGR
assumes you are configuring X.25 connections and
takes you to the set of screens required to configure
DTC X.25 Network Access Cards when you configure
DTS. If you answer no (N), NMMGR assumes you have
no need to configure X.25 connections and takes you to
a different set of screens. If you are using this manual,
you should have entered a Y in response to this
question when you configured your DTCs.
Step 4: Select Guided Configuration
NMMGR displays the NS Configuration screen (Figure 6-3) if you press
the
[NS] key at the Main screen.