Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

130 Chapter6
Configuring X.25 Links Step-by-Step
Configure Neighbor Gateways
1. In the Gateway name field, enter the name of a gateway that is on
the same network as the node that you are configuring.
2. If you are adding the identified gateway for the first time, press the
[Add] key. If you are modifying the configuration of this node, press
the
[Modify] key. The Neighbor Gateway Reachable Networks screen
will be displayed. Proceed to “Identify Neighbor Gateway Reachable
Networks.”
3. Repeat steps 1 and 2 for each gateway that is on the same network
as the node that you are configuring. When you have finished, press
the
[Next Screen] key to return to the X.25 Configuration screen.
Fields Gateway name Each gateway name can be as long as eight
alphanumeric characters. The first character must be
alphabetic.
Identify Neighbor Gateway Reachable Networks
NMMGR displays the Neighbor Gateway Reachable Networks screen
(Figure 6-8) when you press the
[Add] key or the [Modify] key for a valid
gateway name from the Neighbor Gateways screen.
Figure 6-8 Neighbor Gateways Screen
1. In the Neighbor Gateway IP Internetwork Address field,
enter the IP address of the gateway specified on the Neighbor
Gateways screen. An example is:
C 192.007.007 001