Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

134 Chapter7
Managing Networks with DTCCNTRL
DTCCNTRL Parameters
DTCCNTRL Parameters
Dynamically implements DTS changes made in NMMGR. Initiates
automatic configuration of DTCs. Shuts down and restarts the DTS
subsystem. Starts, stops, and controls the operation of host-based X.25
connections. See the following sections for further information on each
of the following functions. See the Configuring Systems for Terminals,
Printers, and Other Serial Devices manual for additional information on
the functions that are not X.25 or PAD operations.
Syntax DTCCNTRL { DTC=dtcname;
FUNC=function;
CARD=cardnum}
[ ;FORCED=foption]
Parameters DTC=dtcname Required if FUNC is one of STARTX25,
STARTPADSUP, STARTBOTH, STOPX25,
STOPPADSUP, STOPBOTH, or STATUS. The DTC
node name of the DTC on which the operation is to be
performed, in the form:
name[.domain][.organization]
If the domain or organization are not provided, the
domain and organization of the local node will be
assumed as the default.
FUNC=function Optional. The function to be performed. If this
parameter is omitted, DTCCNTRL will display the menu
shown below. The desired function can then be selected
from the menu.
The available functions are:
DCSTATUS Displays the result of the last time DTS
dynamic configuration was invoked.
DYNCONF Dynamically implement DTS changes
made in NMMGR.
AUTOCONF Initiate automatic configuration of a
new DTC.
SHUTDOWN Shutdown the DTS subsystem and
release all DTS system resources.
RESTART Startup the DTS subsystem. DTS must
be shut down first.
STARTX25 Activates X.25 services on the specified
card.