Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)
Chapter 7 141
Managing Networks with DTCCNTRL
NMCONFIG and NMCONFIX Files
2. After successful validation and cross-validation, NMMGR will
prompt you as to whether you want DTS changes to take effect now.
The following prompt will appear:
Do you want DTS changes to be become active now (Y/N)?
Y = all changes made take effect now
N = all changes made will take effect upon next dynamic
configuration or system boot
H = help
>
If you type Y, dynamic configuration changes will take effect now.
NMMGR calls DTCCNTRL which dynamically implements the DTS
changes made in NMMGR.
If you type N, dynamic configuration changes will not take effect now.
Your changes will take effect the next time dynamic configuration is
invoked, a DTS shutdown/restart is performed, or the system is
rebooted. Dynamic configuration changes can be implemented later
by calling DTCCNTRL from the CI prompt any time thereafter. Or you
can run NMMGR again and select validate DTS/Link. See the
section “DTCCNTRL After NMMGR Exit,” for steps on how to invoke
the DTCCNTRL command at the CI prompt.
If you type H, you will see help text describing the options.
3. If you selected Y in step 2 above and the DTS changes you have made
are dynamically configurable, no other action is required and
changes will become active automatically. You will see a message on
the screen indicating that no other actions are required.
If the DTS changes you have made require additional actions before
changes become active, refer to Chapter 5, “Preparing to Configure
X.25 iX System Access,” and Chapter 6, “Configuring X.25 Links
Step-by-Step,” step 9, for more information. If this is the case, you
will see messages on the screen indicating what actions are required
before changes become active.
Refer to Table 7-1 for a list of configuration changes that can be
modified dynamically.
4. After viewing the messages describing what actions are required, if
any, enter
[RETURN] when you see the prompt:
(Press RETURN when finished viewing screen contents.)
You will return to the Validation screen. From here you can make
further changes or exit NMMGR.