Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

Chapter 7 145

Managing Networks with DTCCNTRL

DTS Shutdown and Restart

The DTS shutdown capability is provided by the DTCCNTRL command.

It allows you to bring down the entire DTS subsystem and includes the

release of all TIO-related system resources. DTCCNTRL requires that

you have a minimum of System Manager (SM) capability, this operation

can only be done from the system console. When combined with the

DTS restart capability, you can resolve errors that may arise during

Datacomm Conﬁgurator (DCC) start-up without rebooting the HP 3000

host. If you see DCC error messages, ﬁrst ﬁx any problems that caused

the DCC startup error and then run DTCCNTRL to shut down and

restart DTS.

NOTE

Issuing the DTCCNTRL command to perform a DTS shutdown will result

in the deletion of the entire DTS/TIO subsystem from the system. No

TIO users can use the system while it is shut down.

CAUTION

When the “forced” option is invoked, then all sessions logged on to TIO

devices will be aborted and all spooled TIO printers will be stopped.

The DTS restart capability is provided by the DTCCNTRL command and

allows you to restart the DTS subsystem. This command can only be

invoked after the DTS subsystem has been shutdown. The DTS

subsystem will be restarted in the same way that occurs when the

system is rebooted.