Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

Chapter 7 147

Managing Networks with DTCCNTRL

DTCCNTRL Examples

Following are examples of using the DTCCNTRL command to control the

operations of a DTC/X.25 Network Access card. In these examples, the

card is mounted in slot 3 of a DTC with the node named

DTC1.NET.IND.

Start X.25 support services:

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTX25

Start PAD support services (X.25 must already be started):

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTPADSUP

Start both X.25 and PAD support services:

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTBOTH

OR (execute commands in this order):

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTX25

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTPADSUP

Display status of DTC:

:DTCCNTRL DTC=DTC1.NET.IND;FUNC=STATUS

Stop both X.25 and PAD support services:

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STOPBOTH

OR (execute commands in this order):

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STOPPADSUP

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STOPX25

Start X.25 iX System Access for the network named X25NET

(execute commands in this order):

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STARTX25

:NETCONTROL START;NET=X25NET

:NSCONTROL START

Stop X.25 iX System Access for the network named X25NET

(execute commands in this order):

:NSCONTROL STOP

:NETCONTROL STOP;NET=X25NET

:DTCCNTRL DTC=DTC1.NET.IND;CARD=3;FUNC=STOPX25

Force operation of a DTCCNTRL command when another user

has exclusive access to the DTCCNTRL code module:

:DTCCNTRL

DTC=DTC1.NET.IND;CARD=3;FUNC=STARTX25;FORCED=Y