Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

Appendix A 185
Error Messages
DTCCNTRL Error Messages
SYS-TO-SYS switching download failed. (CTLERR 16)
CTLERR 16 Cause: An attempt was made to reconfigure the system-to-system
switching information (X.25 link name or number of switched virtual
circuits) for the DTC using the RC function of DTCCNTRL. A problem
occurred with the DTC while the new configuration values were being
downloaded.
Action: Check the DTC. Correct any problems then reenter the
DTCCNTRL command with FUNC=RC to download the reconfigured
system-to-system switching information.
LUG download failed. (CTLERR 17)
CTLERR 17 Cause: An attempt was made to reconfigure local user group (LUG)
information (remote X.25 address or security level) for the DTC using
the RC function of DTCCNTRL. A problem occurred with the DTC while
the new configuration values were being downloaded.
Action: Check the DTC. Correct any problems then reenter the
DTCCNTRL command with FUNC=RC to download the reconfigured local
user group information.
Start X25 first. (CTLERR 18)
CTLERR 18 Cause: An attempt was made to start PAD support or to download
card-specific X.25 configuration values but X.25 support is not active.
Action: Start X.25 support using the STARTX25 function of DTCCNTRL
then retry the operation. (To start both X.25 and PAD support, use the
STARTBOTH function.)
X25 download failed. (CTLERR 19)
CTLERR 19 Cause: An attempt was made to start X.25 support. A problem
occurred with the DTC while the X.25 support values were being
downloaded.
Action: Check the DTC. Correct any problems then redownload.
Reenter the command to start X.25 support.
The specified card is not an X.25 card. (CTLERR 20)
CTLERR 20 Cause: The card specified in the DTCCNTRL command is not an X.25 iX
Network Access car.
Action: Obtain the correct card number for the X.25 iX Network
Access card and reenter the command using the correct card number
specification.
Invalid RECONF specification. Must be All, X25, Card, Pass, or Logcl.
(CTLERR 21)
CTLERR 21 Cause: A DTCCNTRL command was entered using the RC function but
an invalid option was specified in the RECONF parameter.