Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

Appendix A 187
Error Messages
DTCCNTRL Error Messages
System error : NDM nm_find_port error, err_num = !, proc_num = !.
(CTLERR 101)
CTLERR 101 Cause: Internal error.
Action: Contact your Hewlett-Packard support representative.
System error : NDM get_sysbase error, err_num = !, proc_num = !.
(CTLERR 102)
CTLERR 102 Cause: Internal error.
Action: Contact your Hewlett-Packard support representative.
System error : bad status received from io_info_list, err_num = !,
proc_num = !. (CTLERR 103)
CTLERR 103 Cause: Internal error.
Action: Contact your Hewlett-Packard support representative.
System error : bad NDM port number returned. (CTLERR 104)
CTLERR 104 Cause: Internal error.
Action: Contact your Hewlett-Packard support representative.
System error : bad Send_msg status received, info = !, subsys = !.
(CTLERR 105)
CTLERR 105 Cause: Internal error.
Action: Contact your Hewlett-Packard support representative.
System error : bad Extend_receive status received, info = !, subsys =
!. (CTLERR 106)
CTLERR 106 Cause: Internal error.
Action: Contact your Hewlett-Packard support representative.
System error : bad reply received. (CTLERR 107)
CTLERR 107 Cause: Internal error.
Action: Contact your Hewlett-Packard support representative.
System error : bad error number returned by DTCM. (CTLERR 108)
CTLERR 108 Cause: Internal error.
Action: Contact your Hewlett-Packard support representative.
PAD already stopped. (CTLWARN 01)
CTLWARN 01 Cause: A DTCCNTRL command was entered to stop PAD support but
PAD support was not active.
Action: No action required. This message is for information only.