Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

188 AppendixA
Error Messages
DTCCNTRL Error Messages
PAD already started. (CTLWARN 02)
CTLWARN 02 Cause: A DTCCNTRL command was entered to stop PAD support but
PAD support was already active.
Action: No action required. This message is for information only.
X25 already started. (CTLWARN 03)
CTLWARN 03 Cause: A DTCCNTRL command was entered to start X.25 support but
X.25 support was already active.
Action: No action required. This message is for information only.
X25 already stopped. (CTLWARN 04)
CTLWARN 04 Cause: A DTCCNTRL command was entered to stop X.25 support but
X.25 support was not active.
Action: No action required. This message is for information only.
FUNC specification is not RC, no configuration will be done.
(CTLWARN 05)
CTLWARN 05 Cause: A DTCCNTRL command was issued with the RECONF option
specified but the function was not RC.
Action: To cause reconfigured values to be downloaded, issue a
DTCCNTRL command using the RC function. If no reconfigured values
are to be downloaded, no action is required.