Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

64 Chapter3
Configuring DTCs Step-by-Step
Modify the Network Management Configuration File
Card number Display only.
Port Group
Type
(Optional) The valid type are D for direct connect and M for modem
connect. The default is D.
Ldev The logical device (ldev) number to be associated with
the port. Each ldev number must be unique; it may not
be duplicated by any other device configured on the
system.
Profile Name The terminal or printer profile name to be associated
with the port. The features defined by the profile must
correspond to the actual operating features of the port
and its attached device.
To configure
a different
card, enter
its number;
then press
Config Card The card that you want to configure next. Use this
parameter in combination with the
[Config Card] key to
select and move to a different card in the same DTC.
For example, after card 0 is configured, enter a 1 in this
field and press the
[Config Card] key to move to the
configuration screen for card 1.
Step 8: Configure X.25 Connections
NMMGR displays the DTC X.25 Card Configuration screen (Figure 3-7)
if you press the
[Config Card] key at the DTC Configuration screen (or at
a different card configuration screen) with the card number of a
DTC/X.25 Network Access card in the Config Card field. From this
screen, you move to the screens that let you configure DTC values for
X.25 system-to-system and PAD connections.