Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

78 Chapter3
Configuring DTCs Step-by-Step
Modify the Network Management Configuration File
1. Verify that the cursor is in the first field under Ldev. Type the ldev
number that the nailed connection will use in the Ldev field.
2. Move the cursor to the Profile field and enter the profile name the
connection will use.
NOTE To see a list of existing profiles, press the [Go To Profiles] key. If you
need to create a new profile, see Chapter 4, “Terminal and Printer
Profiles.”
3. Move the cursor to the Device Name field and enter the unique
name assigned to the remote device that will be using this nailed
connection.
4. Move the cursor to the Remote Device (PAD) X.25 Address
field and enter the X.25 address of the remote PAD that will be using
this nailed connection.
5. If you want to associate a closed user group number with this nailed
connection, move the cursor to the CUG No. field and enter the CUG
number.
6. Repeat the above steps for every device attached to this card. (You
can use the
[Fill Cards] key to fill in ldev and profile information.) If
you need to configure more than eight nailed PAD connections for
this card, press the
[Save Data] key to save the data on this screen,
then use the
[Next Page] key to move to a new data entry screen to
configure additional nailed connections. You can configure up to 256
nailed PAD connections for each card.
7. When all nailed connections have been configured, press the
[Save Data] key.
8. Press the
[Go To Security] key to move to the DTC X.25 Card
Configuration — PAD Security screen.
Fields This screen is used to permanently associate ldev numbers and other
information with individual connections that can be made through a
DTC/X.25 Network Access card; that is, to configure nailed PAD
connections.
DTC name Display only.
Card number Display only.
Ldev The logical device (ldev) number to be associated with
the connection. Each ldev number must be unique; it
may not be duplicated by any other device configured
on the system.
Profile The PAD terminal or PAD printer profile name to be
associated with the connection. The features defined by
the profile must correspond to the actual operating
features of the connection and the device.