Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

Chapter 3 79
Configuring DTCs Step-by-Step
Modify the Network Management Configuration File
Device Name The name associated with the PAD-connected terminal
or printer. The device name can be up to eight (8)
characters and must be unique for each PAD
connection.
Remote Device
(PAD) X.25
Address The X.25 address of the remote PAD device. Where
devices are connected to a multiport PAD, include port
subaddresses in this field.
CUG No.
(Optional) The closed user group number (0 to 99), if specified for
your network subscription. Leave blank if your
subscription does not specify a CUG number.
Step 13: Configure PAD Security
NMMGR displays the DTC X.25 Card Configuration — PAD Security
screen (Figure 3-12) if you press the
[Go To Security] key from the DTC
X.25 Card Configuration screen or the DTC X.25 Card Configuration —
Nailed PAD Connections screen. On this screen, you specify either a list
of PAD calling addresses that will be accepted or a list of PAD calling
addresses that will be rejected for connection through the DTC/X.25
Network Access card being configured. You can also reach this screen by
typing the following path at the Command line and pressing the
[ENTER] key:
@DTS.DTC.SELECT.dtcname.X25CARDn.PADSEC