Configuring and Managing Host-Based X.25 Links - Edition 5 (36939-90054)

96 Chapter4
Terminal and Printer Profiles
DTC PAD Profile Field
character mode when EOR and AEOR are not carriage return.
The value in the field is not used during a connection when in character
mode and EOR or AEOR is carriage return. In this case the default
values will be used: parm #3 is 2 and parm #4 is 0.
When the “Forced data forwarding” bit is 1, the data forwarding parms
#3 and #4, that are set at connection time in the PAD, are ALWAYS
used.