HP System Dictionary/XL SDMAIN Reference Manual (32256-90001)

A-170
1428 MESSAGE The number is too large (SDERR 1428)
CAUSE The number entered causes an integer overflow.
ACTION Reissue the +/- command with a smaller number.
1429 MESSAGE There are illegal characters in the number (SDERR 1429)
CAUSE There are unexpected characters in the number.
ACTION Reissue the +/- command with all non-digit characters removed.
1430 MESSAGE Must break the line before insert/append to prevent line overflow (SDERR
1430)
CAUSE Together, the existing line and the string to be inserted or appended will not fit on a
single input line.
ACTION Break the existing line so that the new line and the string to be inserted or appended
will fit on a single input line.
1431 MESSAGE Bad command after delete (ignored) (SDERR 1431)
CAUSE Unexpected characters were on the line after the DELETE command.
ACTION Delete can consist of a continuous string of one or more D' s or two single D' s, with
blanks between. The only other command allowed on the same line as a Delete is an
Insert (I). It (I) is allowed after either of the two D strings.
1432 MESSAGE The entire command has been deleted (SDWARN 1432)
CAUSE The entire command in the REDO buffer has been deleted.
ACTION Since the entire command was deleted, the REDO system returns to the command
mode. Edit the original command or issue a new command.
1433 MESSAGE Unexpected characters after REDO command (SDERR 1433)
CAUSE There are characters on the line after the REDO system command. Except for the D/I
combination, only a single edit command can be entered on a line.
ACTION Reissue the edit command with only a single command on the line.
1434 MESSAGE + and - NOT allowed in a number (SDERR 1434)
CAUSE The numbers used to move within REDO buffer cannot involve a + or -.
ACTION Remove the + or - from the number specifying how far to move and simply use the
appropriate command to specify direction (+ to move forward and - to move backward).
1435 MESSAGE The quoted string after REDO must contain at least one char (SDERR 1435)
CAUSE The string specified after the REDO command contains no characters (or only blanks).
A qualifying value must contain at least one non-blank character.
ACTION Reenter the REDO command specifying a qualifying string to be used to determine the
appropriate command to select from the redo history stack.
1436 MESSAGE No match found for the requested string in the redo stack (SDERR 1436)
CAUSE No match was found for the specified string in the redo history stack.
ACTION Use the SHOWREDO command to obtain a list of the commands currently in the redo
history stack. If the desired command is present, select it by number (either absolute