HP System Dictionary/XL Utilities Reference Manual - Part 1 SDDBD (32256-90003)

186 AppendixE
SDVPD Error Messages
SDVPD ERROR MESSAGES (3100–3458)
command key word.
ACTION: Check the subject name pointed by “^”, and see if it is misspelled.
3271 MESSAGE: Illegal parameter for the MPE command (SDERR 3271). Error code:!
CAUSE: An MPE command is issued with an illegal argument.
ACTION: Check the command argument, and see if it is incorrect.
3272 MESSAGE: No such MPE command (SDERR 3272). Error code: !
CAUSE: An unknown MPE command is issued.
ACTION: Make sure that the command issued can be execute through the command
intrinsic.
3276 MESSAGE: Error occurred while forming the upshift table (SDERR 3276)
CAUSE: NLInfo NL intrinsic invocation failed.
ACTION: Notify the Dictionary Administrator or the System Manager of the problem.
3400 MESSAGE: SDVPD version incompatible with that of SD intrinsics (SDERR 3400)
CAUSE: The program’s version number is different from the intrinsic’s version.
ACTION: Notify the Dictionary Administrator of the problem.
3405 MESSAGE: Program aborts due to too many errors (SDERR 3405)
CAUSE: The program detected the number of errors specified through the run-option.
ACTION: Check your input and see where the errors have occurred.
3410 MESSAGE: $STDINX open error. Program aborted (SDERR 3410)
CAUSE: An error occurred while opening $STDINX.
ACTION: If the “STDIN = ” clause was issued on the RUN command, see if the file equated
to STDIN actually exists and if the file is not being exclusively accessed by some other
user. If a serious problem is suspected, notify the Dictionary Administrator or the System
Manager.
3411 MESSAGE: Error while reading from input file. Program aborted (SDERR 3411)
CAUSE: A disc error occurred while reading from the program input file.
ACTION: Check the file system error message. Notify the Dictionary Administrator or the
System Manager of the problem if a serious problem is suspected.
3412 MESSAGE: Premature EOF reached on input file. Program aborted (SDERR 3412)
CAUSE: The EOF is found while reading on the input file.
ACTION: Edit SDIN file to correct the problem. Be sure to include the EXIT command
before the EOF.
3420 MESSAGE: Error while writing to SDLOG. Program aborted (SDERR 3420)
CAUSE: A disc error occurred while writing to SDLOG.
ACTION: Check the file system error message given. See if the disc is full. If a serious
problem is suspected, notify the Dictionary Administrator or the System Manager.