HP Telnet/iX User's Guide (36957-90156)
25
3 Using the Telnet/iX Client
This chapter provides you with the information you can use to
accomplish the following tasks with the Telnet/iX Client:
• Running the Telnet/iX Client Program
• Viewing Telnet/iX Client Status
• Connecting and Logging on to a Remote Host
• Viewing a Remote Directory
• Displaying/Setting/Toggling Telnet/iX Client Values
• Suspending the Telnet/iX Client
• Issuing MPE/iX Commands From Within Telnet/iX
• Exiting the Telnet/iX Client
The examples in this chapter show output received from an MPE/iX
user’s terminal accessing an HP 9000 workstation.
Commands issued after connection to a remote host must be consistent
with that host’s user interface.
To follow the same steps as the examples, make sure you have the
following:
• Remote logon name and password
• Remote system internet protocol (IP) address
NOTE
Telnet/iX Client commands can be entered in upper or lower case
letters. Upper case letters for client commands are used in the
examples for clarity.