MPE/iX Documentation Guide HP e3000 MPE/iX Computer Systems Edition 12 Manufacturing Part Number: 32650-90896 E0701 U.S.A.
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for direct, indirect, special, incidental or consequential damages in connection with the furnishing or use of this material.
Introduction to MPE/iX Collections 9 Alphabetical Listing of MPE/iX Manuals 13 Communicator & System Software Maintenance Manual Collection 21 MPE/iX Operating Systems Collection 27 Development Tools and Distributed Computing 33 High Availability 67 System Hardware and Diagnostics 73 Networking and Communications 79 Network and Systems Management 87 3
MPE/iX 7.
Using This Manual Read chapter 1 to understand the MPE/iX collections and find out what is new for this release. Chapter 2 lists the manuals in alphabetical order and points you to the correct chapter (chapters 3 through 9) in this guide to find information about a specific manual. If you are looking for information on the latest publication date of a manual turn to Appendix A. To verify a part number turn to Appendix A.
Introduction to MPE/iX Collections 1 Introduction to MPE/iX Collections The MPE/iX collections provide an extensive library of manuals and other learning products documenting the use of your HP e3000. You are now reading the MPE/iX Documentation Guide, 32650-90896 which introduces and explains the organization of this library, which is grouped into collections. The MPE/iX collections for the HP e3000 are listed below.
Introduction to MPE/iX Collections Ordering Learning Products Ordering Learning Products This chapter provides a listing of customer manuals for the HP e3000 computer system that have been introduced or changed since the MPE/iX 6.5 Release. With this release, you will receive two CD-ROM documentation CDs: an HP Instant Information CD and a MPE/iX Documentation Collection PDF Format CD. Using the PDF Format CD-ROM requires that you have Adobe Acrobat Reader installed on your computer.
Introduction to MPE/iX Collections Learning Product Changes for Release 7.0 (C.70.00) and Release 7.0 Express 1 (C.70.01) Learning Product Changes for Release 7.0 (C.70.00) and Release 7.0 Express 1 (C.70.01) This section lists all customer manuals introduced or updated from MPE/iX Release 6.5 to MPE/iX Release 7.0 Express 1. Table 1-1. MPE/iX 7.0 New or Updated Manuals Manual Title Part No. Latest Edition Communicator e3000 MPE/iX Release 7.01 30216-90328 7/01 Communicator e3000 MPE/iX Release 7.
Introduction to MPE/iX Collections Learning Product Changes for Release 7.0 (C.70.00) and Release 7.0 Express 1 (C.70.
Alphabetical Listing of MPE/iX Manuals 2 Alphabetical Listing of MPE/iX Manuals This chapter provides an alphabetical listing of the software manuals available for MPE/iX.
Alphabetical Listing of MPE/iX Manuals Table 2-1.
Alphabetical Listing of MPE/iX Manuals Table 2-1.
Alphabetical Listing of MPE/iX Manuals Table 2-1.
Alphabetical Listing of MPE/iX Manuals Table 2-1.
Alphabetical Listing of MPE/iX Manuals Table 2-1.
Alphabetical Listing of MPE/iX Manuals Table 2-1.
Alphabetical Listing of MPE/iX Manuals Table 2-1. Alphabetical Listing of Manuals Manual Title Part Number Collection Using the HP 3000 Workload Manager B3879-90002 N&SM (9) Using the Node Management Services (NMS)Utilities 32022-90053 N&SM (9) Using VPLUS/V: An Introduction to Forms Design 32209-90004 DT&DC (5) VISTA Plus for MPE Administrators Guide B3933-90004 HA (6) VISTA Plus for MPE User’s Guide B3933-90003 HA (6) VISTA Release Notes Version A.
Communicator & System Software Maintenance Manual Collection 3 Communicator & System Software Maintenance Manual Collection The manuals in the MPE/iX Communicator and System Software Maintenance Manual Collection and the topics that each manual documents are described on the following pages. Each manual documented in this chapter is identified in the following alphabetical listing, and the functional focus of the material it contains is identified. Table 3-1.
Communicator & System Software Maintenance Manual Collection MPE/iX Communicators and System Software Maintenance Manuals Collection MPE/iX Communicators and System Software Maintenance Manuals Collection The following briefly describe the Communicators and the System Software Maintenance Manuals for Supported systems. Communicator e3000 (Release 7.0 Express 1) Part Number: 30216-90328 This number is updated with each Communicator.
Communicator & System Software Maintenance Manual Collection MPE/iX Communicators and System Software Maintenance Manuals Collection • Samba/iX 2.0.7 • ci enhancements • Product Release History • Catalog of Changed or New User Documentation Communicator e3000 (Release 6.5) Part Number: 30216-90291 This number is updated with each Communicator. Functional Focus: General usage This document is a compilation of articles that describe new or changed products for the MPE/iX Release 6.5.
Communicator & System Software Maintenance Manual Collection MPE/iX Communicators and System Software Maintenance Manuals Collection • System support tools. • Application development. • Data/application integration. • Interoperability and Internet Solutions • Year 2000 Enhancements. • Peripherals. • Technical articles. • Product release history. • Catalog of user documentation. HP 3000 MPE/iX System Software Maintenance Manual 7.0 Part Number: 30216-90317.
Communicator & System Software Maintenance Manual Collection MPE/iX Communicators and System Software Maintenance Manuals Collection AUTOINST. • Update, add-on, and/or apply PowerPatch, using CD-ROM source media and HPINSTAL. • Manage and apply Reactive patches and/or PowerPatch patches, with or without Adding-on subsystem products, using HP Patch/iX. • Stage and apply Reactive patches and/or PowerPatch patches, using HP Patch/iX and HP Stage/iX.
Communicator & System Software Maintenance Manual Collection MPE/iX Communicators and System Software Maintenance Manuals Collection 26 Chapter 3
MPE/iX Operating Systems Collection 4 MPE/iX Operating Systems Collection The manuals in the MPE/iX Operating System Collection and the topics that each manual documents are described on the following pages. Each manual documented in this chapter is identified in the following alphabetical listing, and the functional focus of the material it contains is identified. Table 4-1.
MPE/iX Operating Systems Collection MPE/iX Operating System Collection MPE/iX Operating System Collection The following briefly describe the manuals in the MPE/iX Operating System Collection. FCOPY Reference Manual Part Number: 32212-90008 Functional Focus: High-level general usage This manual describes how to use FCOPY to copy all or portions of selected files from any supported input device to any supported output device.
MPE/iX Operating Systems Collection MPE/iX Operating System Collection • Requests and messages from the system. • Cursor movement, editing, selection, and function keys. • HP Easytime/XL options. • Wildcard character sets. MPE/iX Commands Reference Manual Part Number: 32650-90877 Functional Focus: Basic general usage This manual describes the MPE/iX commands alphabetically (A through X) and includes a user guide to commands by task.
MPE/iX Operating Systems Collection MPE/iX Operating System Collection • System aborts error messages. • Security error messages. MPE/iX Error Messages Manual (Volume II) Volume II Part Number: 32650-90902 Functional Focus: Programming This volume of the MPE/iX Error Message Manual provides a listing of system aborts and error messages for the MPE/iX operating system. This volume contains information on the following topics: • Subsystem error messages. • Compatibility mode and native mode error messages.
MPE/iX Operating Systems Collection MPE/iX Operating System Collection and several subsystems in an abbreviated, easy to use format. This quick reference guide contains information on the following topics: • MPE/iX commands. • MPE/iX utilities. • MPE/iX intrinsics. • FCOPY and SORT-MERGE/XL commands. • MPE/iX System Debug commands. • The MPE/iX File System.
MPE/iX Operating Systems Collection MPE/iX Operating System Collection • Input and output by record. • Altering the collating sequence. • Obtaining SORT-MERGE information. Using HP 3000: Advanced Skills Tutorial Note: Files for Tutorial can be downloaded from http://jazz.external.hp.com/papers/ Part Number: 32650-90872 Functional Focus: High-level general usage This self-paced course introduces high-level general usage concepts for MPE/iX.
Development Tools and Distributed Computing 5 Development Tools and Distributed Computing The manuals in the Development Tools and Distributed Computing collection and the topics each manual documents are described on the following pages. Each manual documented in this chapter is identified in the following alphabetical listing, and the functional focus of the material it contains is identified. Table 5-1.
Development Tools and Distributed Computing Table 5-1. Development Tools and Distributed Computing Manual Title/ Part Number HP ALLBASE Query User Guide 32426-64001 HP ALLBASE/BRW Reference Manual 35360-90052 HP ALLBASE/BRW SW Update Notice for MPE/iX (BRW A.01.
Development Tools and Distributed Computing Table 5-1.
Development Tools and Distributed Computing Table 5-1.
Development Tools and Distributed Computing Development Tools and Distributed Computing Development Tools and Distributed Computing The following manuals deal with development in various languages and distributed computing. Accessing Files Programmer's Guide Part Number: 32650-90885 Functional Focus: High-level programming This guide describes how programmers can create, open, close, read from, write to, and update files, as well as specify file characteristics and file security.
Development Tools and Distributed Computing Development Tools and Distributed Computing • Using Parameter Substitution in Dynamic Statements. • Preprocessing in Static Conversion Mode. • Transaction Management with Multiple DBEnvironment Connections. • COBOL Preprocessor Enhancements. • Programming with Indicator Variables in Expressions. • Tuning Performance with GENPLAN. • Using Procedure Cursors with Multiple Row Result Sets. • Flagging non-standard SQL with the FIPS Flagger.
Development Tools and Distributed Computing Development Tools and Distributed Computing • Sequential and BULK table processing. • Dynamic operations. ALLBASE/SQL Database Administration Guide Part Number: 36216-90214 Functional Focus: ALLBASE database administration This guide describes how to design, create, and maintain an HP SQL database. This guide contains information on the following topics: • Database administrator's tasks and tools. • Logical and physical design of databases.
Development Tools and Distributed Computing Development Tools and Distributed Computing This manual contains information on the following topics: • Types of messages and how they are returned. • ALLBASE/SQL error messages. ALLBASE/SQL Pascal Application Programming Guide Part Number: 36216-90082 Functional Focus: ALLBASE Pascal application programming This guide describes how to write a Pascal program that accesses an HP SQL DBEnvironment.
Development Tools and Distributed Computing Development Tools and Distributed Computing This manual contains information on the following topics: • Understanding and using HP SQL. • ALLBASE/SQL queries. • ALLBASE/SQL names, data types, expressions, and search conditions. • ALLBASE/SQL commands.
Development Tools and Distributed Computing Development Tools and Distributed Computing • Using commands programmatically. • Controlling variables. • Controlling job control words. • Identifying parameter input. Compiler Library/XL Reference Manual Part Number: 32650-90029 Functional Focus: High-level programming This manual describes the mathematical/utility functions and procedures available on the MPE/iX operating system.
Development Tools and Distributed Computing Development Tools and Distributed Computing EDIT/3000 commands and how to use them to create and modify EDIT/3000 files. This manual contains information on the following topics: • EDIT/3000 features, editing modes, and file definitions. • Initializing, running, and terminating EDIT/3000 in interactive sessions and batch jobs. • EDIT/3000 commands and their use. • Customizing EDIT/3000 on your system.
Development Tools and Distributed Computing Development Tools and Distributed Computing This manual provides programming examples for the features of TRANSACT, a high-level programming language for transaction processing applications. This manual contains information on the following topics: • Getting started with TRANSACT. • Using character mode I/O and IMAGE. • Using VPLUS and IMAGE. • Using KSAM and MPE/iX. • Automatic error handling, prototyping, and data structures.
Development Tools and Distributed Computing Development Tools and Distributed Computing • EZAccess tutorial. • SQLAccess tutorial. • EZReport tutorial. • EZCreate tutorial. • Commands syntax. • Error messages. HP ALLBASE/BRW Reference Manual Part Number: 35360-90052 Functional Focus: Programming This manual provides technical information about HP ALLBASE/BRW, a high performance business report writing system for information management professionals.
Development Tools and Distributed Computing Development Tools and Distributed Computing Functional Focus: General usage This manual describes step-by-step training for BRW. This manual contains information on the following topics: • Getting started. • Creating a simple report. • Refining the report. • Performance considerations. HP Browse/XL User's Guide Part Number: 36384-90001 Functional Focus: Programming and general usage This guide provides complete information on how to use HP Browse/XL.
Development Tools and Distributed Computing Development Tools and Distributed Computing This guide contains information on the following topics: • Introducing HP C. • HP C storage and alignment comparisons. • The optimizer. • Debugging HP C programs. • Programming for portability. • Migrating HP C programs. HP C/iX Library Reference Manual Part Number: 30026-90004 Functional Focus: High-level C programming This manual contains the standard library and math library functions for HP C/iX on the HP e3000.
Development Tools and Distributed Computing Development Tools and Distributed Computing This guide contains information on the following topics: • ANSI 85 features. • Programming practices, subprograms, and intrinsics. • Manipulating files, file types, and file codes. • Compiling, linking, and executing programs. • Debugging a program.
Development Tools and Distributed Computing Development Tools and Distributed Computing This manual describes using VPLUS to enter data with ENTRY, design forms with FORMSPEC, reformat specifications with REFSPEC, and using FORMSPEC in batch mode. This manual contains information on the following topics: • Entering data with ENTRY. • Designing forms with FORMSPEC. • Advanced Forms Design • Reformatting specifications using REFSPEC. • VPLUS/iX intrinsics. • Using FORMSPEC in batch mode.
Development Tools and Distributed Computing Development Tools and Distributed Computing HP FORTRAN 77/iX Programmer's Guide Part Number: 31501-90022 Functional Focus: High-level FORTRAN programming This guide provides detailed information about specific HP FORTRAN 77/iX programming tasks. This guide contains information on the following topics: • Using data storage and formatted input/output. • HP FORTRAN 77/iX file operations and subprograms. • Writing efficient programs and tuning performance.
Development Tools and Distributed Computing Development Tools and Distributed Computing Functional Focus: System operations This guide explains how to administer and maintain HP IMAGE/SQL. It assumes knowledge of IMAGE/SQL. This guide contains information on the following topics: • Administrative tasks with step-by-step directions. • Concepts and functionality. • Utility commands. • Locks and deadlocks. • Transactions, repeatable reads, and aborted transactions. • Error messages.
Development Tools and Distributed Computing Development Tools and Distributed Computing • Program structure and input/output. • Predefined Pascal/iX constants, data types, and modules. • Program allocation and alignment. • Dynamic variables, parameters, and procedure options. • External routines, intrinsics, error recovery, and debugging. • The optimizer.
Development Tools and Distributed Computing Development Tools and Distributed Computing This guide contains information on the following topics: • Creating RPG/iX programs. • Using disk files and a terminal in an RPG/iX program. • Processing data in RPG/iX programs. • Compiling and executing RPG/iX programs. • Communicating with MPE and other RPG programs. • Writing efficient RPG/iX programs.
Development Tools and Distributed Computing Development Tools and Distributed Computing • RISE utility features, commands, and recovery procedures. • XSORT features, specifications, commands, and applications. HP Software Revision Controller (SRC) Implementation Guide Manual Part Number: 30234-90003 Functional Focus: High-level programming This guide describes implementing the HP Software Revision Controller (HP SRC).
Development Tools and Distributed Computing Development Tools and Distributed Computing HP System Dictionary/XL COBOL Definition Extractor Reference Manual Part Number: 32257-90001 Functional Focus: Dictionary administration and COBOL programming This manual provides instructions and reference information for the operation of the system dictionary COBOL definition extractor (SDCDE) utility. This manual contains information on the following topics: • Using the COBOL definition extractor.
Development Tools and Distributed Computing Development Tools and Distributed Computing • Using the SDUTIL program, its commands, and how to run it. HP System Dictionary/XL Intrinsics Reference Manual Part Number: 32256-90002 Functional Focus: Dictionary administration This manual provides information about the system dictionary architecture and security scheme, a description of every system dictionary intrinsic, and program examples.
Development Tools and Distributed Computing Development Tools and Distributed Computing Functional Focus: Programming HP TRANSACT Reference Manual Part Number: 32247-90028 Functional Focus: Programming This manual describes TRANSACT, a high-level programming language for transaction processing applications. This manual contains information on the following topics: • The TRANSACT language. • TRANSACT programs. • TRANSACT data storage registers. • Running TRANSACT. • TRANSACT verbs.
Development Tools and Distributed Computing Development Tools and Distributed Computing • Users and elements of ISQL and native language support. • Using ISQL. • Managing ISQL transactions, files, and modules. • ISQL commands. KSAM/3000 Reference Manual Part Number: 32650-90386 Functional Focus: Database programming This manual provides information on keyed sequential access method (KSAM), a method of accessing files indexed by keys.
Development Tools and Distributed Computing Development Tools and Distributed Computing • Creating, accessing, and modifying application message catalogs. • Accessing system error messages. • Creating your own help facility. • The GENCAT message application catalog utility.
Development Tools and Distributed Computing Development Tools and Distributed Computing • Header descriptions. MPE/iX Developer's Kit Reference Manual (Volume 2) Part Number: 36430-90008 Functional Focus: High-level C programming This manual describes the supplemental POSIX/iX library.
Development Tools and Distributed Computing Development Tools and Distributed Computing This manual introduces the various components of MPE/iX Shell and Utilities through a series of tutorials and guides. This manual contains information on the following topics: • Command overview. • MPE/iX Shell tutorial. • AWK tutorial (AWK is a programming language, a report-generating program, a utility for examining files, and more). • Vi tutorial. • LEX and YACC programs. • Make software management tool.
Development Tools and Distributed Computing Development Tools and Distributed Computing This guide contains information on the following topics: • Defining processes. • Process handling using different capabilities. • Creating, activating, suspending, delaying, deleting, and interrogating processes. • Deadlock considerations. • Creating and aborting sessions programmatically.
Development Tools and Distributed Computing Development Tools and Distributed Computing • How to debug CM and NM programs. • System Debug user interfaces. • System Debug commands and intrinsics. • Dump analysis tool (DAT) and standalone analysis tool (SAT) user's guides. • DAT/Debug command specifications. Trap Handling Programmer's Guide Part Number: 32650-90026 Functional Focus: High-level programming This guide provides information on the creation of traps and trap handling.
Development Tools and Distributed Computing Development Tools and Distributed Computing Up and Running With ALLBASE/SQL Part Number: 36389-90016 Functional Focus: General database usage This manual is a basic guide for users who are new to ALLBASE/SQL or relational database concepts. This manual contains information on the following topics: • Basic tools and concepts for databases. • Designing and creating a database. • Comparing ALLBASE/SQL with TurboIMAGE/XL. • Glossary of database terms.
Development Tools and Distributed Computing Development Tools and Distributed Computing Using VPLUS: An Introduction to Forms Design Part Number: 32209-90004 Functional Focus: High-level general usage This manual provides information for users who are not programmers but who want to learn how to design forms for data entry. This manual contains information on the following topics: • Using VPLUS. • Designing and using a simple form. • Performing simple and full field edits.
Development Tools and Distributed Computing Development Tools and Distributed Computing 66 Chapter 5
High Availability 6 High Availability The topics each manual documents are described on the following pages. Each manual documented in this chapter is identified in the following alphabetical listing, and the functional focus of the material it contains is identified. Table 6-1.
High Availability High Availability High Availability The following manuals deal with aspects of high availability. AutoRestart/XL User's Guide Part Number: 36375-90004 Functional Focus: System administration This guide describes how to install and use AutoRestart/XL, a software product for use on the HP e3000 computer systems. AutoRestart/XL performs automatic system restart and dump to disk in the event of a system failure.
High Availability High Availability • How to monitor the High Availability FailOver/iX. • How to recover from a FailOver. Installation/Upgrade procedures for SHAREPLEX Part Number: B3933-90005 Functional Focus: System administration Mirrored Disk/iX User's Guide Part Number: 30349-90005 Functional Focus: System administration This guide provides step-by-step procedures for installing and maintaining mirrored disks and performing split-volume backups.
High Availability High Availability NetBase for MPE Reference Guide Part Number: B3933-90001 Functional Focus: Network Management This guide describes the NetBase Services. These services allow a network of Hewlett Packard commercial computers to work together as one large system.
High Availability High Availability view production reports. This guide teaches you the fundamentals of working with VISTA Plus. VISTA Release Notes Version A.07 Part Number: B3933-90006 Functional Focus: System administration These release notes describe the enhancements in VISTA release A.07.
High Availability High Availability 72 Chapter 6
System Hardware and Diagnostics 7 System Hardware and Diagnostics The topics each manual documents are described on the following pages. Each manual documented in this chapter is identified in the following alphabetical listing, and the functional focus of the material it contains is identified.
System Hardware and Diagnostics System Hardware and Diagnostics Manuals System Hardware and Diagnostics Manuals The following manuals describe the Hardware and Diagnostics available for the MPE/iX operating system. CPU Upgrade Manual (9x9KS Servers) Part Number: A2375-90012 Functional Focus: System hardware This manual contains technical information about HP 9000 and HP 3000 for the K-Class Servers.
System Hardware and Diagnostics System Hardware and Diagnostics Manuals • Available Services. • Hardware Historical Records. • Software Historical Records. • System I/O Configuration. • Preventive Maintenance. • Installation Records. • Customer Support Service Agreement. HP 3000 CS 99x/890/T500 Families Operator's Guide Part Number: A1809-96019 Functional Focus: System operations This handbook contains information for the operator to operate and monitor the 99x/890/T500 computer system.
System Hardware and Diagnostics System Hardware and Diagnostics Manuals This manual also contains information for installing the Distributed Terminal and for configuring modems for remote support. This manual does not include instructions for installing networks.
System Hardware and Diagnostics System Hardware and Diagnostics Manuals 3000/9x9KS) computer systems. Installation Guide (99x Family) Part Number: A1809-90001 Functional Focus: System hardware This guide contains technical information about HP 3000 Corporate Business Servers (99x Family) and HP 9000 Corporate Business Servers (T-Class Systems).
System Hardware and Diagnostics System Hardware and Diagnostics Manuals System Upgrade Installation Guide (CS 99x Family) (Upgrading 991/995 to 996) Part Number: A3310-90001 Functional Focus: System installation This guide contains technical information about processor and memory cards for HP 3000 Corporate Business Systems (99x Family) and HP 9000 Corporate Enterprise Servers (T-Class), and is intended for experienced Hewlett-Packard customer service personnel.
Networking and Communications 8 Networking and Communications The topics each manual documents are described on the following pages. Each manual documented in this chapter is identified in the following alphabetical listing, including the functional focus of the material it contains. Table 8-1. Networking and Communications Manual Title Part Number APPC Subsystem on MPE XL Node Manager's Guide 30294-90007 Configuring and Managing Host-Based X.
Networking and Communications Networking and Communications Networking and Communications The following manuals deal with communcations and networking. APPC Subsystem on MPE/XL Node Manager's Guide Part Number: 30294-90007 Functional Focus: System administration and network management This guide describes managing the APPC subsystem on MPE/iX. This guide contains information on the following topics: • The APPC subsystem on MPE/iX. • Interactive APPCCONTROL operator commands.
Networking and Communications Networking and Communications This guide contains information on the following topics: • User commands. • User tasks and file system behavior. • Troubleshooting. • User error messages. • Remote user information for using the MPE/iX file transfer protocol server (commands and tasks).
Networking and Communications Networking and Communications • Installation/verification information for the HP 3000 network manager/ administrator who will be installing the TELNET/iX Client • A User's Guide for MPE/iX users who want to use the TELNET/iX Client to logon remotely between the HP 3000 and other HP and non-HP systems that support the TELNET service.
Networking and Communications Networking and Communications • Program design, buffer management, and debugging. NetIPC 3000/XL Programmer's Reference Manual Part Number: 5958-8600 Functional Focus: Network programming This manual discusses the intrinsics used in network interprocess communication (NetIPC). NetIPC provides access to the Transmission Control Protocol (TCP) and the X.25 protocol.
Networking and Communications Networking and Communications • LAP-B link messages. • Logging location codes. • How to file a service request. NS3000/iX NMMGR Screens Reference Manual Part Number: 36922-90043 Functional Focus: Network management This manual is a reference document for using NMMGR in non-guided mode to configure and manage NS3000/iX. This manual contains information on the following topics: • Link configuration screens. • Network transport configurations. • LAN, point-to-point, X.
Networking and Communications Networking and Communications • Troubleshooting SNA IMF/XL. SNA Link/iX Node Manager's Guide Part Number: 30291-90507 Functional Focus: Node management This guide describes Hewlett-Packard's system network architecture link products for the MPE/iX operating system. This guide contains information on the following topics: • SNA node and link configuration. • Logging configuration. • SNA node startup and shutdown. • SNA link troubleshooting. • SNACONTROL commands.
Networking and Communications Networking and Communications • NRJE user intrinsics. • NRJE manager intrinsics. • MPE support utilities and commands. Using NS3000/iX Network Services Part Number: 36920-90008 Functional Focus: Programming and network general usage This manual provides information on the NS3000/XL network services. This manual contains information on the following topics: • Virtual terminals. • Remote file and database access. • Network file transfer. • Remote process management.
Network and Systems Management 9 Network and Systems Management The manuals in the Network and Systems Management collection and the topics each manual documents are described on the following pages. Each manual documented in this chapter is identified in the following alphabetical listing, and the functional focus of the material it contains is identified. Table 9-1.
Network and Systems Management Table 9-1.
Network and Systems Management Network and Systems Management Collection Network and Systems Management Collection The following collection of manuals describe systems management and networking. 8 Port Serial PCI ACC Multiplexer Installation & User’s Guide Part Number: 30291-90508 Functional Focus: Network management This manual describes how to install and use the Advanced Communications Controller (ACC) Subsystem which is an intelligent serial communication product for HP e3000 Workstations and Servers.
Network and Systems Management Network and Systems Management Collection Functional Focus: System operations and system administration This manual discusses the workstation configurator, a utility program used to create customized printer and terminal files to support additional devices. This manual contains information on the following topics: • Understanding and using the workstation configurator. • Workstation configurator menus. • Modifying terminal and printer type files.
Network and Systems Management Network and Systems Management Collection the following topics: • Overview of security features. • Passwords and logons. • Using Access Control Definitions (ACDs). • Auditing system usage. • Using the features of the Security Configurator. HP Security Monitor/iX User's Guide Part Number: 32650-90497 Functional Focus: Network management This guide describes the security features provided for general users of HP e3000 systems.
Network and Systems Management Network and Systems Management Collection Functional Focus: System management This guide describes the security features provided for managers of HP e3000 systems. It contains a general overview of the security features and then delves into the specifics for implementing and maintaining the security measures. This guide contains information on the following topics: • Overview of security features. • Passwords and logons. • Using Access Control Definitions (ACDs).
Network and Systems Management Network and Systems Management Collection This manual contains information on the following topics: • What's new for system administrators. • What's new for programmers. • Managing accounts, groups and users. • Managing directories and files. • Backing up and recovering MPE/iX. • Handling security on MPE/iX.
Network and Systems Management Network and Systems Management Collection Performing System Management Tasks Part Number: 32650-90854 Functional Focus: System management This guide discusses typical tasks and procedures that a system manager might perform. This guide contains information on the following topics: • Planning your system backup strategy. • Managing system hardware components and disks (volume sets). • Starting up, configuring, and shutting down your system.
Network and Systems Management Network and Systems Management Collection • Preparing for a backup. • Storing and restoring files. • Backing up the system configuration. • Using backup media to recover from a system failure. • Disaster recovery. System Startup, Configuration, and Shutdown Reference Manual Part Number: 32650-90892 Functional Focus: System administration This manual describes the startup procedures for an MPE/iX system, related configuration procedures, and system shutdown.
Network and Systems Management Network and Systems Management Collection • Introduction to the general security features. • Protecting system access. • Using Access Control Definitions (ACDs). • Maintaining file integrity.
Network and Systems Management Network and Systems Management Collection • Using volume management to perform various tasks. • Volume management VOLUTIL commands. • Recovering data with DISCUTIL.
Network and Systems Management Network and Systems Management Collection 98 Chapter 9
MPE/iX Manual Part Numbers A MPE/iX Manual Part Numbers This appendix lists the MPE/iX manuals in numerical order by their part number. Each part number is followed by the manual's title and the most current edition date of this manual. Table A-1.
MPE/iX Manual Part Numbers Table A-1. Manuals Listed by Part Number Part Number Manual Title Latest Edition 30293-90010 SNA IMF/XL Node Manager’s Guide E0692 30293-90006 Using SNA IMF Pass Thru E1290 30294-90007 APPC Subsystem on MPE/XL Node Manager’s Guide E0692 30294-90008 LU 6.
MPE/iX Manual Part Numbers Table A-1.
MPE/iX Manual Part Numbers Table A-1.
MPE/iX Manual Part Numbers Table A-1. Manuals Listed by Part Number Part Number Manual Title Latest Edition 32650-90471 User’s Guide to MPE/iX Security E0494 32650-90491 Volume Management Reference Manual E0494 32715-90001 HP Business BASIC/XL Reference Manual E1187 35360-90052 HP ALLBASE/BRW Reference Manual E0192 35360-90203 HP ALLBASE/BRW SW Update Notice for MPE/iX (BRW A.01.
MPE/iX Manual Part Numbers Table A-1.
MPE/iX Manual Part Numbers Table A-1.
MPE/iX Manual Part Numbers 106 Appendix A
